Anton Paar - Rheolab QC / UDS / MCR

ReolÓgiai alkalmazÁsi leÍrÁsok

Amennyiben érdeklődésének megfelelő cikket talál, kérem emailben juttassa el hozzánk a cikk címét és 'Version' vagy 'id' számát, illetve az Önök által használt Anton Paar készülék szériaszámát, hogy minél előbb eljuttathassuk Önnek a kért alkalmazási leírást.

> Adhesives, Hotmelts, Sealants and Plastisols:

< Sagging Behavior of Cavity Protection Coating for Cars after Application (…), English, (id: 7754566073), Version: 7/2005 (ancs05071e-a)

< Thermal behavior of a hotmelt-adhesive (…), English, (id: 6966131330)

< Gelling and curing behavior of PVC plastisols (…), English, (id: 2041688263), Version: an96011-c

< Rheological characterization of the application behavior of sealants (…), English, (id: 1014432460)

< The Rheology of Hot Melt Adhesives (…), English, (id: 7146033645), Version: anad03091e-b

< UV curing glue (…), English, (id: 8464210033), Version: 4/2007 (-)

> Asphalt and Bitumen:

< Behavior of bitumen in the temperature range of 0 ºC to +70 ºC (…), English, (id: 4490807354), Version: an9609e6-b

< Bitumen and Asphalt AASHTO/SHRP specifications TP5 (…), English, (id: 5995013714)

< Consistency of bitumen at low temperatures from T = -50 to 0 °C Frequency Sweep measured with a solid bar sample (…), English, (id: 8768185377)

< Rheological Studies on Bituminous and Asphalt Binders used for Road Engineering (…), English, (id: 4593295157)

> Building Materials:

< Reducing the cost of lime cement plaster by selecting appropriate methylcellulose combinations (…), English, (id: 7814586759), Version: an99072e-b

< A new ball measuring system for large particle suspensions (…), English, (id: 4850059748)

< The setting behaviour of free flowing composite with a normal and a reduced proportion of setting retarder (…), English, (id: 5160621405), Version: an99071e-b

< The influence of different stirring methods on the flow behaviour of lime cement plaster (…), English, (id: 7446041107), Version: an99073e-

> Cosmetics and Pharmaceuticals:

< Determining the rheological properties of pharmaceutical products - microemulsions (base for lotions and gels) (…), English, (id: 2791531384)

< Determining the yield point and viscosity of cosmetic products Example: Hair gel (RheolabQC) (…), English, (id: 7030797005

< Comparison of two cosmetic lotions using frequency sweeps (…), English, (id: 9306288362)

< Analysis of an amplitude sweep using the method YIELD STRESS II (…), English, (id: 6003906131)

< Thixotropic recovery of nail polish (…), English, (id: 4979926944), Version: anco04051e-b

> Electronics:

< Curing Process of Epoxy Molding Compounds (…), English, (id: 8470928073)

< Curing Process of Epoxy Molding Compounds (…), English, ATTZE3TM (id: 8870210648)

> Electrorheology:

< Electro Rheological Device (ERD) ? Measurement of electro rheological fluids (…), English, (id: 1259945184), Version: 8/2004 (-)

> Food:

< Spoonability of yoghurt and other foods (…), English, (id: 1431742311), Version: 4/2006 (AN_MCRxx1_Tool-Holder-C)

< Using Vane Fixtures in a Rheometer (…), English, (id: 6483355165), Version: 4/2003 (andv03041e-b)

< Determining the yield point and viscosity of chocolate (RheolabQC) (…), English, 136 kB, pdf (id: 1158929616), Version: 2/2005 (-)

< Rheological characterization of food (…), English, (id: 3353864253)

< Starch experiments using the Physica SmartStarch analyzer and pressure option (…), English, (id: 2469105422)

< Rheological characterization of cheese (…), English, (id: 5785083175)

< Rheological characterization of weakly structured food samples: Using a rheometer at extremely low torques (…), English, (id: 3245856762)

< Measuring the flow curve of a meat sauce containing meat chunks (…), English, (id: 7742010951

< Rheological characterization of ice cream (…), English, (id: 8933139443)

< Comparison of the viscosity of beverages (…), English, (id: 1877746135)

< Milk drinks: Rheological Tests for determining the separation stability of low-viscosity dispersions (…), English, (id: 639955029)

< Advantages of sandblasted measuring systems at measurements of oily and fatty substances (…), English, (id: 1939637512)

< Characterization of the structure at rest in food (Example: Ketchup) (…), English, (id: 6463658810)

< Interfacial rheology of coffee samples (…), English, (id: 4278395176), Version: 2007/8 (-)

> Magnetorheology:

< Magneto Sweep - A new method for characterising the viscoelastic properties of magnetorheological fluids (Product Information) (…), English, (id: 244560689)

< A new method for the characterization of the viscoelastic behavior of magneto-rheological fluids (…), English, (id: 8158840537)

< Magneto Sweep - A new method for characterizing the viscoelastic properties of magnetorheological fluids (published article) (…), English, (id: 6876640916)

> Measurement technology:

< RheolabQC makes quality control easy (…), English, (id: 1305833459), Version: 4/2005 (-)

< New possibilities for frequency sweeps (…), English, (id: 7444078326), Version: 3/2006 (-)

< Nano-Rheology with the Physica MCR Series (…), English, (id: 8786728382), Version: 3/2006 (-)

< Rheological tests round the clock! Measurements with the automatic sample changer ASC 32 (…), English, (id: 176029690)

< New developments in accuracy for temperature control of rotational rheometers (…), English, (id: 2633768022), Version: andv02031e-a

< Direct Strain Oscillation: A new oscillation method enabling measurements at very small deflection angles and torques (…), English, (id: 794331729), Version: andv01031e

< TruGap - absolute gap measurement for cone-plate and plate-plate geometries (…), English (id: 9021017551), Version: 10/2004 (-)

< Direct Strain Oscillation: A new oscillating method enabling measurements at very small shear stress and strain (…), English, (id: 2612540722), Version: andv02-41-356e-a

< Physica Advanced Peltier System PTD 150 (Pat.Pend.) - Making the temperature control with a Peltier system accurate (…), English, 717 kB, pdf (id: 5813401937), Version: andv0191e-

< Strain rate controlled oscillation on soft solids (…), English, ATTWY78E (id: 4368126392), Version: 1/2007 (-)

< Guideline for Pressure Cell (…), English, (id: 4667543769), Version: guideline_for_pressure_cell-

< Rheo Small Angle Light Scattering (Rheo-SALS) and Rheo-Microscopy as tools for investigations of structure-property relations in complex fluids (…), English, (id: 8575633168)

< Interfacial rheology - Comparison of bi-cone system and Du Noüy ring (…), English, (id: 9222159386) ,Version: 8/2007 (-)

< Automation and high throughput in rotational rheometry for polymers (…), English, (id: 284211896), Version: 1/2008 (-)

< Twelve years of DC motors in rotational rheometers (…), English, (id: 5683601499), Version: 9/2007 (-)

< Accurate temperature control in rotational rheometers (Poster) (…), English, (id: 4726625085), Version: 9/2007 (-)

< Variable cone truncation of cone & plate measuring systems as a function of cone angle and cone diameter (…), English, (id: 9466565251), Version: 3/2008 (-B)

< Dielectric Spectroscopy and Rheology (…), English, (id: 9306671023), Version: 2008/5 (an0805_drd_e-a)

< On the use of EC motors in rotational rheometers (…), English, (id: 479907617), Version: 2008/6 (-)

< Combined rheological methods - From rheo-optics to magneto-rheology and beyond (…), English, (id: 8012331128), Version: 2008/6 (-)

> Paints, Coatings and Laquers:

< Modern Rheology Measurements In Today's Coatings Industry (18 p.) (…), English, (id: 1333492547), Version: 2/2005 (-)

< Modern Rheology Measurements in Today's Coatings Industry (7 p.) (…), English, (id: 2846272290), Version: 2/2005 (-)

< A chamber for characterizing the rheological behavior of UV-curing materials (…), English, (id: 8423556089), Version: 11/2004 (anco04111e-b

< Rheological Characterization of Coatings (24 p.) (…), English, (id: 8988189697), Version: 4/2004 (ancs04051e-a)

< Rheological Measurements for the Simulation of Process Engineering Techniques for Paints (…), English, (id: 2093485892)

< Thixotropic behavior of paints and coatings (…), English, (id: 3245113194)

< Quality Assurance - Rheological Testing of the Sagging Behavior of Coatings (…), English, (id: 9810996056)

< Comparison of two spray paints (…), English, (id: 3470117450)

< Comparison of the 'thixotropic behavior' of two textured coatings: Structural regeneration, surface leveling and sagging behavior (RheolabQC) (…), English, (id: 1600007117), Version: 2/2005 (-)

< The behaviour at rest (…), English, (id: 5776782632)

> Paper Coatings:

< New rheological test method to determine the dewatering kinetics of suspensions (…), English, (id: 6163143516), Version: ansus01021ar-

< Using an Immobilization Cell to test Paper Coatings (…), English, (id: 9676343203), Version: 4/2003 (anpc0341e-c)

< New rheological test method to simulate the processing of paper coatings (…), English, (id: 2796389163)

< Rheological characterization of paper coatings (…), English, (id: 1180471256)

> Petrochemicals and Lubricants:

< Characterization of Lubricating Greases (…), English, (id: 4673844874)

< Temperature-Dependent Rheology of Lubrication Greases (…), English, ATT6PG49 (id: 7616930604), Version: 1/2007 (-A)

< Tribology on MCR Rheometers: Introduction and Measurements (…), English, (id: 9674620032), Version: 2/2007 (-A)

< New flexible platform for tribological measurements on a rheometer (…), English, (id: 7663464546), Version: 1/2008 (-)

> Polymers - DMTA:

< Measuring the glass temperature of a polyethylene HDPE sample. Dynamic Mechanical Thermal Analysis (DMTA) in Torsion Tests. (…), English, (id: 4070549905), Version: 12/2006 (DMTA_HDPE-D)

< Comparison of two epoxy resins EP composites in the temperature range from +25°C to +200°C. Dynamic Mechanical Thermal Analysis (DMTA) in Torsion. (…), English, (id: 9622793198), Version: 12/2006 (DMTA EP-C)

< Thermal behavior of a rubber-elastic polymer (…), English, (id: 3565238118)

< Comparison of a Polypropylene PP reinforced with glass fibers and a pure Polypropylene over a temperature range from -150°C to +180°C. Dynamic Mechanical Thermal Analysis (DMTA) in Torsion. (…), English (id: 9284275770), Version: 12/2006 (DMTA PP-D)

< Working with the Solid Rectangular Fixture SRF and the Convection Temperature Device CTD600 (…), English, (id: 4371259511), Version: 12/2006 (Technical Note SRF-D)

< Investigation of a Polymethylmethacrylate PMMA over a temperature range of -150°C to +160°C. Dynamic Mechanical Thermal Analysis (DMTA) in Torsion Tests. (…), English, (id: 296224859), Version: 12/2006 (DMTA_PMMA_E-E)

< DMTA test of a Polypropylene PP solid bar at T = -150°C up to +170°C (…), English, (id: 8177291155)

> Polymers - General:

< Practically relevant rheological analysis of polymers using a modern rheometer (…), English, (id: 248341691)

> Polymers - Melts:

< Processing behaviour of Polystyrene PS: Time Temperature Superposition - Master Curve (…), English, (id: 2613795400)

< Comparison of Polyethylene PE Melts Using Frequency Sweeps (…), English, (id: 5254642963)

< Comparison of Polypropylene PP Melts Using Frequency Sweeps (…), English, (id: 7904167771), Version: anpo03031e-g

< Getting the zero shear viscosity of polymer melts with different rheological tests (…), English, (id: 3285486698)

< How to calculate the relaxation modulus G(t) (…), English, (id: 2414032519)

< Relaxation test permitting to calculate the complex viscosity function resp. zero shear viscosity (…), English, (id: 9162188768)

< Calculation of the relaxation time(s) and the relaxation time spectrum H() of a polypropylene melt (…), English, (id: 1257148385), Version: 1/2002 (-)

< Comparison of linear and branched Polyphenylsulfone PPSU in film and granular form (…), English, (id: 3164874911), Version: 11/2007 (-a)

< Calculation of the weight average molar mass Mw based on the zero-shear viscosity measurement using a frequency sweep (…), English, (id: 4424345195), Version: 3/2009 (molar_mass_mw-b)

> Polymers - Solutions:

< Flow and viscosity curves of polymer solutions (…), English, (id: 6367587447

< Validation of empirical rules for a standard polymer solution by different rheological tests (…), English, (id: 1461525559)

> Printing Inks:

< Time- and frequency-dependent measurements on printing inks (…), English, (id: 4527704120)

< The consistence of new and used offset printing ink (…), English, (id: 1694650948), Version: anpi99071e-b

< Rheology of Printing Inks: Is it worth it to measure viscoelasticity? (…), English, (id: 1126283705), Version: anpi03041e-a

> Small Angle Light Scattering (SALS):

< Identification of flow and structure properties by combining small angle light scattering (SALS) and rheology (…), English, (id: 2955847383), Version: anpo04011e_sals-b

> Suspensions and Dispersions:

< Yield point and viscosity to describe the pumping and transporting process of slurriesExample: Kaolin suspensions (RheolabQC) (…), English, (id: 311761256)

< Rheology: worth a second look? (…), English, (id: 6750150919)

< New rheological measuring possibilities: Advantages for application technology (…), English, (id: 1323271543)

Az Anton Paar Hungary Kft. nyitólapja (új lapon)